CATV Tools

Two-Way Cable Block

The block is used to support up to 2 3⁄4” telephone, fiber or coaxial cable prior to the lashing operation. The frame and sheave are cast of aluminum.
Wt. 4 lbs.
PY-750 — 1⁄4” strand
WH-48 — 5⁄16” and 3⁄8” strand

Cable Block

C-555 - This innovative block is the most versatile in the industry...strand locking pin adjusts for 1⁄4”, 5⁄16” (6M), and 3⁄8”(10M) strands. (A spring-loaded steel pin keeps the cable in the block). The Cable Lifter can be used with a lay-up stick to place the block in mid-span.
Wt. 14 oz.
C-840 for Lemco D-1196 and D-1097 sticks.
C-840J for Lemco D-1000-363 and Jameson1 models.

Corner Blocks

K-468J, M-370J

Corner Blocks are used to guide fiber and coaxial cable around corners. The MIG welded steel frames are designed on a strong 17” radius and support the rollers on 2” centers. Proper alignment of the cable to the input end of the corner block will ensure minimum friction, ease of pull-out and quality installed cables. The cable keepers can be set to the true degree of the corner. A row of aluminum rollers accommodates super trunk cables and is compatible with synthetic winch lines. Flared edges allow for safe cable entry and exit. All Lemco corner blocks can be used with both fiber optic and coaxial cables.

Cable Block Lifter

Used to place the PY-750 or L-381-4 cable blocks in mid-span, the Lifter is made of plated steel.
Wt. 1.3 lbs.
F-301 for Lemco D-1196 and D-1097 lay-up sticks
D-66 for Lemco D-1000 and Jameson models.

ACST: Adjustable Coring & Stripping Tools

ACST offers an adjustable chamfering strip stop Strip stop length changed by simple adjustment of external screw in tool body Center conductor length can be adjusted from 1/2” (12.7mm) to 2’’ (50.8mm) Integral strip stop chamfers the center conductor, negating the need for a separate chamfering tool ACST retains all the same quality features of the standard CST tool (heat treated coring bits, replaceable sheath cutting blades) Available in T-handle or ratchet, and all are drill adaptable New drill adapter allows use of common “quick disconnect” drill chucks.
Length: 8.81 in (226.00 mm)
Weight: 0.99 lbs. (454.0 g)

AJST: Armored Jacket Stripping Tool

AJST is designed to remove the outer jacket and armor layer on CommScope P3 JACASS and QR JACASS underground construction trunk and distribution cable Factory preset blade with no adjustment required Unique design has a common handle and interchangeable stripping heads for a range of cable sizes Rugged, color coded anodized aluminum design (same as other Cablematic tools) for easy identification and long life Extra long handle provides better stripping leverage and greater hand protection from armor chip (always wear hand and eye protection) Kits available; call Customer Service for availability.
Length: 6.2 in (159.00 mm)
Weight: 10.92 ounces (312.0g)

CR: Hex Crimp Tools
For CATV, MATV and STV type cable connectors

Precision quality alloy steel jaws are self-bottoming and will not over-crimp Toggle action delivers correct crimping force Rugged components for long, trouble-free performance Star wheel permits precise, easy compression adjustment Easy-to-read hex sizes stamped on frame Full-cushion handles will not slide off Rugged steel frame with heat treated pins for maximum strength and operating life.
Length: 8.93 in (229.00 mm)
Weight: 1.61 lbs. (737.0 g)

TW-AH-B Model Torque Wrenches

Proper connectorization at ‘F’ connector interface with factory preset torque setting Audible ‘clicking’ sound to indicate proper calibrated torque Basic Angled head model.

Fiber Optic Kit

Ripley’s fiber optic termination kit offers a high quality set of tools for the professional installer Standard kit items sold with a rugged, positive-closure, hard case.

Standard kit includes:

• FO 103-S – Fiber Stripper
• Model 100 – Buffer Tube Scoring Tool
• FOKC – Kevlar Cutters
• FOPD-25 – Universal polishing disc for 2.5 mm ST, SC and FC connectors
• CS-30-DE – Double End Carbide Fiber Optic Scribe
• FCT – Fiber Continuity Tool
• FPP-1 – Fiber Polishing Pad
• FS-100Z – 60 to 100x Inspection Scope
• MT-1 – “Magna-Tweez” tweezers
• RMC-6 – 6 inch (152mm) precision scale
• Crimp Tool
• Permanent marker pen
• Fiber Waste container

Safety Glasses Recommended.
Length: 11.89 in (305.00 mm)
Height: 3.51 in (90.00 mm)
Width: 16.848 in (432.00 mm)
Weight: 4.38 lbs. (2 kg)

Hex Crimp Tools/ R-953, R-731

Lemco offers the highest quality crimp tools in the industry. Positive, full cycle crimping is controlled by a ratchet that qualifies craftsmanship. Precision machined, hardened, and plated parts offer dependability and durability. Wt. 1 lb.

D528V - Diagonal Bell-System Pliers - "W" & "V" Notches

"W" notches to cleanly slit insulation. "V" notch at hinge for quick insulation crushing. Tapered nose for easy working in confined areas and close tip cutting.

Model 501 Tracker II Cable Locator

Model 501 Tracker II offers professional performance in wire locating. With its inductive signal application, the Tracker II can be used on active or dead systems. Now you can trace the path and determine the depth of wires and metallic pipes without having to deactivate the systems. The high frequency transmitter provides range up to 4000 feet and depth to 7 feet.
Transmitter: 4.25 x 3 x 3.25"
Case: 33.5 x 8.25 x 3.75"
Weight: 6.7 pounds complete kit

Model PE2003 Pulser Cable Fault Locator

Model PE2003 Pulser fills in the hole of your buried cable troubleshooting tool set. The Model PE2003 Pulser lets you identify the exact location of even the smallest breaks in the insulation of buried cables. The portable transmitter "pulses" a high voltage signal that radiates into the earth at the location of the faults. With the A-Frame mounted receiver, a visual analog meter points the way to the source of the voltage. Multiple faults on a single wire can be identifies indicating the need to replace instead of repairing.
Transmitter: 17" x 8.5" x 6.5"(in case), Receiver: 33.5" x 21.75" x 3.25" (on A-Frame)
Weight: 12.5 pounds complete 

402K - CATV Tone and Probe KitR

CATV Tone and Probe Kit Designed specifically for the CATV industry, the 402K will send tone through any passive device along the cable path. Now you can tone through splitters, directional couplers and traps. No more long delays trying to figure out non-tagged or mistagged cable drops. The 402K is simple to use and provides fast, accurate results. The transmitter and receiver are equipped with female F-connectors and the kit provides both audible and LED test and tone indications.

Fiberglass Lay-Up Sticks

D-1000 Series Lay-Up Sticks feature exterior leaf spring locking button hardware and are interchangeable with Jameson FG-6/3 Series lay-up sticks. These yellow, hollow core fiberglass sticks weigh and handle like the Jameson sticks and use the same work head accessories.

D-1196 & 1097 Series Lay-Up Sticks feature steel hardware with internal spring loaded locking buttons. Numbered hash marks serve as height indicators from 13-17’. The middle hook of a wire raising tool indicates 18’ (One labeled stick per set).

Wire Raising Tool

Fabricated of 3⁄8” diameter plated steel, the work head is suitable for strand and cable construction.
Wt. 1 lb.
WRT-303 for Lemco D-1196 and D-1097 lay-up sticks
WRT-100 for Lemco D-1000-363 and Jameson models.

Cable Lifter

Used to lift cables into cable blocks.
Wt. 2 lbs.
CL-200 for Lemco D-1000-363 and Jameson models.
CL-330 for Lemco D-1196 and D-1097 lay-up sticks.

No. CL-1  Cable Lifter

 

No. FG-6/3
Hollow extension pole: One 3' & three 6' sections

No. JE-6/3
Foam-filled extension poles: One 3' & three 6' sections

No. JE-6
6' Foam-filled extension pole

No. FG-6
6' Hollow extension pole

No. FG-3
3' Hollow extension pole

No. BF-3/6
Three 6' extra thick walled poles

No. TP-12F
6'-12' Telescoping Extension Pole with Female Ferule and Rubber Base Cap

Model FG-6 Shown

Model TP-12F Shown

Glo Fish Rods

Non-conductive sectional rods glow in the dark for wiring in new construction or areas without electricity: Drop Ceilings, Attics, Floors, Walls, & Crawl Spaces.

No. 7-8-IK
(Pictured) Two 5' x 1/4", Two 2.5" x 1/4", Four 5' x 3/16" Rods. 1 Whisk, 2 Hooks & 2 Bullet Nose with Eyelet Accessories

No. 7-36-23T
Three 6' x 1/4" & Two 3' x 1/4" Rods. 1 Bullet Nose with Eyelet & 1 Hook Accessories

No. 7S-718T
Seven 18”X3/16” Rods, Bullet Nose with Eyelet and Hook Accessories

Model 7-8-IK Shown

Pictured: Big Buddy®, Easy Buddy®, and Wee Buddy

Big Buddy® Conduit Rodder:

1/2" OD ROD for rod or fish conduit of 4" or larger. 1,400 lb. pull strength. Comes in 400' to 1000' lengths. Accessory Kit sold separately.

Good Buddy® Conduit Rodder:

3/8" OD ROD for rod or fish conduit of 2"-4". 1,000 lb. pull strength. Comes in 300' and 400' lengths. Accessory Kit included.

Good Buddy® II Conduit Rodder:

3/8" OD ROD for rod or fish conduit of 2"-4". 1,000 lb. pull strength. Comes in 400', 500' and 600' lengths. Accessory Kit included.

Good Buddy® III Conduit Rodder:

Smaller frame size for portability. 3/8" OD ROD for rod or fish conduit of 2"-4". 1,000 lb. pull strength. Comes in 400', 500' and 600' lengths. Accessory Kit included.

Easy Buddy® Conduit Rodder:

1/4" OD ROD for rod or fish conduit of 1" to 2". 400 lb. pull strength. Comes in 300' and 400' lengths. Accessory Kit sold separately.

Little Buddy® Fish Tape:

3/16" OD ROD for fish conduit of 3/4"- 1 1/2". 200 lb. pull strength. Comes in 150' to 300' lengths. Accessory Kit included.

Wee Buddy® Fish Tape:

1/8" OD ROD for fish conduit as small as 1/2" ID. 200 lb. pull strength. Comes in 50' to 150' lengths. Available with or without the Accessory Kit.

Pictured: 5/16" and 7/16" Duct Hunters

5/16" Duct Hunter:

5/16" OD ROD has male ferrule end to attach sonde, roller guide or pulling eye. Comes in 300' and 400' lengths. Accessory Kit included.

7/16" Duct Hunter:

7/16" OD ROD has male ferrule end to attach sonde, roller guide or pulling eye. Comes in 500' and 600' lengths. Accessory Kit included.

Pulling Grips, Stress Relief Grips, and Swivels

Model AAA Series — Single or Double Weave, 1/4" - 1/2"

Recommended wherever high strength and small size are required. Work load is 750 lbs. to 1,700 lbs. depending on the model number.

Model D Series — Triple Weave, 2 3/4" - 3 1/2"

heavy duty grips manufactured of Hi-Fatigue plastic coated Aircraft Strand steel cable in a continuous weave process. Plastic coated strands increase the life of the grip, provide a bearing surface on underground pulls and increase the ease and safety of installation and removal for workmen. Work load is 4,500 lbs. to 5,500 lbs. depending on the model number.

Closed-Mesh Fiber Optic Pulling Grips

This Lewis grip is especially designed for long pulls. It features a continuous single weave design that provides an even pull from the receiving end through the pulling eye. The grip is fabricated of coated galvanized aircraft strand for long life and safety. Each grip has a 24" mesh length for maximum gripping surface. Work load is 600 lbs. to 900 lbs. depending on the model number.

U-Bail Suspension Grips

These grips are constructed of uncoated galvanized wire and are used for bus drops and general suspension. They are available in light-duty, standard-duty, and heavy-duty applications. If coated wire is required, please add “CW” to the end of the part number. Coated wire is not available on Light Duty U-Bail Suspension Grips. Work load is 500 lbs. to 12,000 lbs. depending on the duty rating and the model number.

Sealed Thrust Ball Bearing Swivel with Grease Zerk

HD-S-Z series is designed exclusively for directional boring applications that require a greaseable swivel. The HD-S-Z is the high quality reliable choice. All the quality you have come to expect from the Lewis Swivel Line coupled with the greaseable option (please grease the swivel before and after each use). Work load is 5,400 lbs. to 30,000 lbs. depending on the model number.

Throwing Weight J-1024

Attach a hand line for throwing through trees and other ropethrowing operations. One pound of lead captivates a wire eye and is enclosed in a 3⁄4” wall of foam rubber. It adds safety to a hazardous operation and will save many car finishes. 3” in diameter. Wt. 1 lb.

J. L. Matthews Co. offers an extensive line of products. To see a complete listing please refer to our Brand New catalog.

View the catalog Online (PDF 108 MB)
Download the Catalog (PDF 108 MB)
Request a Hard Copy (paper)