High leverage ratchet mechanism for single-handed cutting of
copper and aluminum cables, leaving no burrs or sharp edges.
Quick release opens blades in every cutting position.
Precision ratcheting mechanism holds cable tight and allows
rapid, straight cuts with minimum effort. Hardened steel
cutting blades for lasting strength and sharpness. Plastic
covered handles with hand guards for comfort and firm grip.
Locking lever keeps handles closed for easy transport, to
fit in toolbox or bag. Cuts copper and aluminum up to 600 MCM.
Insulated Nut Driver Set Kit
Individually tested to exceed standards. Two layers of
insulation for protection against electric shock.
Cushion-grip handles for greater torque and comfort.
Patented Tip-Ident® quickly identifies nut driver and size.
Full hollow shafts facilitate work on long bolt
applications. Custom Cordura® case with document pocket. 9-Piece Set Includes: 3/16", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2",
9/16", 5/8"
Part No. 33523 - 3" and 4" Shafts Part No. 33524 - 6" Shafts
NEW
33523 pictured
Insulated Tools
Klein
insulated tools exceed IEC 60900 and ASTM F1505 standards ,
for insulated tools, and are clearly marked with the
official 1000-volt rating symbol.
Two layers of insulation provide protection against
electric shock.
5162T - 8-Pocket Extra-Capacity Tool
Pouch
Leather construction. Extra-capacity multi-purpose pouch.
Stitched and riveted.
RAUCKMAN UTILITY PRODUCTS
BugWrench™ Model
BW-251
Ideal for working on pad-mount transformers and
secondary pedestals. BW-251 comes with a reversible ratchet
Penta fitting with built-in 3/8” hex socket for “Twist-Off”
equipment locks and 5/16” Ball-Tip Hex (Allen). Ball-Tip Hex
has a 2” working length for insulated or non-insulated
transformer secondary bars.
BugWrench™ Model BW-223HD
This
Heavy-Duty Dropped-Forge BugWrench model has a combination
of 9/16" and 3/4" that cannot be found at the local hardware
store. This combination is just right when installing or
performing maintenance on overhead transformers.
Battery Powered Tools
BURNDY PRODUCTS
In-Line
Crimp Tool
Will accept any “W” die used in MD6 or MD7, includingW28K
cutter dies. 180 degree head rotation. Superior crimp
performance powered by 14 volt Ni-Mh Makita batteries. More
than 350 crimps on 4/0 copper splice or lug.
Comes complete-tool, 2 Batteries, Charger, Safety Strap,
Plastic Case. Three year limited warranty (1 year on
batteries and charger). Specify 120 VAC charger or 12 VDC Charger (fits in
cigarette lighter).
No. PATMD6-8-14V, With "O" and "D3" Dies No. PATMD6-14V, With "BG" and "D3" Dies
PATRIOT Battery Tools
All tools come with battery charger (specify 120 VAC
or 12/24 VDC), two Ni-Mh batteries, safety lanyard,
plastic carrying case. Five year limited tool warranty (1
year on batteries and charger).
No. PAT600-18V
Crimper, 6 Tons Output Force Range same as
MD6/MD7 series tools (all "W" dies) plus up to
600 kcmil copper lugs & splices up to 350
aluminum lugs and splices. Features permanent
flip-open "D3" die.
No. PAT750XT-18V
Crimper, 12 Tons Output Force Range uses all
"U" dies, copper and aluminum lugs and splices
to 750 kcmil. Copper and aluminum taps to 500
kcmil (477 18/1 ACSR). Hyground to 500 kcmil.
Full tension splices to 556.5 ACSR. Features
1.65" opening, patented alignment guide.
No. PAT644-18V
Crimper, 11 Tons Output Force For use on
copper and aluminum lugs and sleeves. Range of
#6 – 1000 kcmil copper, #6 – 750 kcmil aluminum.
Features 1 crimp per end.
No. PAT81KFT-18V
Crimper, 6 Tons Output Force For use on
copper and aluminum lugs and sleeves. Range of
#6 – 1000 kcmil copper, #6 – 750 kcmil aluminum.
Features 4 point crimp configuration.
No. PATCUT129ACSR-18V
Cutter, Cuts ACSR, Copper, Aluminum, Rebar,
GuyWire, Ground Rods. Range up to 1.29" O.D.
Features replaceable blades.
No. PATCUT245CUAL-18V
Cutter, Cuts Copper, Aluminum and Flex Cables.
Does not cut ACSR, Steel, Ground Rod, Rebar, &GuyWire.
Range up to 2.45" O.D. (1000 kcmil 35 kV URD
cable w/ jacket). Features replaceable blades.
HUSKIE TOOLS
ECO-EZ Battery Powered In-Line Compression Tool
The
ECO-EZ In-Line compression tool has a powerful 6 ton
output. When ordering chose from any of the four available
heads that meet your needs. This tool operates on
the same 14.4 volt battery used in all of the Huskie Robo
tools.
No. EZBG
D3 Nest Die with “BG” Nose built-In.
Accepts “W” Style Dies.
No. EZO
D3 Nest Die with “O”
Nose built-In. Accepts “W” Style Dies.
No. EZND
D3
Nest Die (no nose die) Snub Nose. Accepts “W” Style Dies.
No. EZK
Takes Kearney “O” Type Dies. oes Not
Accept “W” Style Dies.
Standard kit includes 1 ECO-EZ Tool (Specify Head), 2 BP-70E Battery Packs, 1 CH-35R 25 minute AC Charger,
and 1 Carrying Case.
No. REC-EZ558 Streamline
Robo Crimp
6 ton compression tool with 1.8" Jaw.
Designed to squeeze commonly used service
entrance connectors, including lugs, slices,
H-Taps, and C-Taps. Accepts either "W" or "O"
type dies. D3 nest die comes standard with the
tool. Accepts the optional 25CAT cutter head
attachment.
No. REC-3610 ROBO CRIMP
15 ton compression tool with 2" Jaw, latched
head and pull-pin release. Jaw accepts all "P"
type dies. PU-15 die adapter is available for
use with all 12 ton "U" type dies. Crimp splices
and lugs to 1250 MCM aluminum and 1500 MCM
copper.
No. REC-558U ROBO CRIMP
6 ton compression tool with 1.8" Jaw.
Designed to squeeze commonly used service
entrance connectors, including lugs, sleeves,
H-Taps, and C-Taps. Accepts either "W" or "O"
type dies. D3 nest die comes standard with the
tool. Accepts the optional 25CAT cutter head
attachment.
No. REC-54 ROBO SLICE
Battery powered heavy duty scissor-type cable
cutter with notched blade, 2-1/8" Jaw. Cuts ACSR
up to 636, aluminum cable up to 1500 MCM and
limited sizes of copper cable. Designed for
single and multi-stranded steel cores and AL
cables. Will not cut ground rods or thick steel
stranded guy wires.
No. REC-50U ROBO SLICE
Battery powered gear-driven cable Cutter with
2" Jaw. Cuts aluminum up to 1500 MCM and copper
up to 1000 MCM. Designed for cutting URD cables
in a limited amount of space. Will not cut ACSR
or steel.
Standard Kits Include: 1 Compression
or Cutting Tool, 2 Battery Packs, 1 Charger (AC
or DC Charger) and a Carrying Case.
Greenlee Textron INC.
Greenlee is one of the premier sources for professional
grade tools when it comes to cutting, crimping, and
installing wire and cable.
Electrician Hand Tools
KLEIN TOOLS
5300 - Electrician's Tool Set
Perfect kit for the professional or apprentice. 7-pocket
leather tool pouch holds an assortment of 10 products.
Contains two Phillips-tip screwdrivers, two cabinet-tip
screwdrivers, one wire stripper/cutter, one diagonal-cutting
pliers, one long-nose pliers, one side-cutting pliers, one
pump pliers, one power-return measuring tape, one web belt,
one tool pouch.
80141 - 41-Piece Journeyman™ Tool
Set
Comfortable
and durable tools for the professional. Contains one
side-cutting pliers, one diagonal-cutting pliers, two
long-nose pliers, one pump pliers, one crimping/cutting
tool, one cable cutter, two Klein-Kurve™ wire
strippers/cutters, one Klein-Kurve utility knife, two
adjustable wrenches, three keystone-tip screwdrivers, three
cabinet-tip screwdrivers, two phillips-tip screwdrivers, one
wire-bending screwdriver, one square-recess tip screwdriver,
one Rapi-Driv® screwdriver, one conduit-fitting & reaming
screwdriver, one 12-piece hex-key set, seven nut drivers,
one awl, one torpedo level, one protective eyewear, one
cable splicer's kit, one canvas zipper bag, one power-return
rule, one 120' Speedway® fish tape, one shoulder strap, one
18" 10-pocket tool bag.
5167 - 11-Pocket Tool Pouch
Leather construction. Multi-pocketed pouch made for
electricians and other professionals. Soft, pliable, and
moisture-resistant to retain flexibility even after being
wet and dried. Riveted and stitched. Stainless steel
power-return tape holder clip (accommodates from 8' to 30'
tapes). Heavy-duty chain tape thong securely fastened with a
rivet.
Long-Reach Long-Nose Pliers
Long handles and nose allow for greater access to
confined, hard to reach areas. Long reach design provides
greater holding power at the tip with minimal effort.
Hot-riveted joint for smooth action and no handle wobble.
Knurled jaws for precise gripping and sure wrapping and
looping of wire.
D360-11 - Straight Nose D362-11 - 45 Degree Bent Nose D364-11 - 90 Degree Bent Nose
NEW
Magnetic Tip Nut Driver
NEW
Full hollow shafts facilitate work on stacked circuit
boards or other long bolt applications. Internal flanges
provide solid, twist-resistant shaft anchor. Premium chrome
plated for smooth feel and corrosion resistance. Meets or
exceeds applicable ASME / ANSI specifications. Handle end is
also color coded for easy identification. Cushion-Grip
handle allows for greater torque and comfort. Patented Tip-Ident®
quickly identifies nut driver and size.
Iron Worker Hand Tools
KLEIN TOOLS
J2000-9ST - Journeyman™ 9"
Ironworker's Work Pliers-High Leverage
Special
knurled, spring loaded jaws for working with annealed rebar
tie wire. Exclusive handle tempering absorbs the "snap" when
cutting wire. Soft, light-blue handle material on outer
surface for comfort and a firm grip. 2000 Series heavy-duty
cutting knives cut ACSR, screws, nails and most hardened
wire.
Bucket Truck Tools
COOPER TOOLS
Crescent® Brand 170 Piece
Professional Tool Set
1/4", 3/8", & 1/2" Drives
Combination Wrenches
Screwdrivers and Much More
The tool boards are made of ABS. This light, durable
material does not fray or flake and has superior cold
weather characteristics. These boards are built and arranged
with the worker in mind. They save precious space in the
basket, yet keep the tools in a handy position.
708 - This is our original tool board. It remains a
popular design with many utilities (18" x 20").
708-2 - This board holds a variety of
most often used tools. This includes speed wrenches,
hammers, compression tools, and a light (18" x 20").
708ID - This new aerial lift tool
board complements our popular 708 Tool Board Series. It was
designed by Niagara Mohawk Power and is perfect for aerial
lifts that use an impact driver and need a convenient socket
holder. This holder will carry 6, 1/2" drive sockets on the
tool board. It firmly holds the sockets by extra long socket
stems that can accommodate all deep well sockets.
RAUCKMAN UTILITY PRODUCTS
MeterPuller™
The MeterPuller works on virtually any
residential, commercial and industrial electric meters that
plug into a meter socket. Ring-type or ring-less meter bases
are no problem for the MeterPuller.
No. M-001:
Residential Single Phase Meters
No. M-002A: Both
Residential Single-Phase Meters and Industrial / Commercial
Poly-Phase Meters
No. M-009: Storage / Carrying Bag for
One MeterPuller (not pictured)
M-001
M-002A
WARREN HEIM
BUZZLINE®
Canvas Bags
Aerial Apron Vinyl, 18
Pockets, Fully Re-inforced Magnetic Strip
Blackwrap Aerial Bucket 5 Inside Pockets
Blackwrap Oval Tool Bucket 14" x 7" x 9", 13
Outside Pockets w/2 Grommets
KLEIN TOOLS
Tool Tote™
Constructed of rugged, 600x300 denier polyester to resist
wear and tear on the jobsite. 2" wide, 900-lb test,
polypropylene padded carrying handles with comfortable
leather strap. Durable molded bottom with drain holes to
prevent water retention.
Water-resistant to avoid the build-up of mold and mildew.
No. 58890 - 17-Pocket
Contoured, padded, slip resistant shoulder strap for
hands-free mobility. 17 total pockets designed to carry an
assortment of tools. 10 exterior multi-tool pockets for a
variety of tools including one closeable pocket. Heavy duty
chain tape thong.
No. 58886 - 7-Pocket
7 exterior multi-tool pockets for a variety of tools and
mobile phone.
Optional Shoulder Strap (Cat. No. 58889), sold separately.
NEW
15 Inch Cordura® Ballistic Nylon
Tool Bag
NEW
Molded bottom made with a durable impact modified
polypropylene. 8-interior and 2-exterior pockets. Large
opening with reinforced steel frame maintains the bag's
shape while loading and unloading. 2" wide polypropylene
padded handles with comfortable leather wrap. Box-stitched
handles and D-ring shoulder strap mounts.
Optional adjustable shoulder strap (Cat. No. 58889).
Cordura® is a registered trademark of INVISTA
Lights
HD ELECTRIC COMPANY
Aerial Bucket Light
The Aerial
Bucket Light is a dual beam, 16,000 candlepower spotlight
and 3,000 candlepower floodlight that is designed for use on
aerial lift buckets. The light swivels and can be aimed in
any direction to illuminate the area required, and the
mounting bracket allows it to be mounted anywhere on the
aerial bucket rim.
12 Volt Spot and Flood Lights
The Versa-Lite® product line offers a wide variety of
spot and flood lights, ranging from a 50,000 candlepower
floodlight to a 300,000 candlepower spotlight. Features:
Magnetic base supplied on all units (except Model-R Handheld
Spotlight), Straight cord or coil cord (depending on model),
and 12-volt cigarette lighter cord.
Disposable Hard Hat & Safety Lights
The Rite-Lite® hard hat lights conveniently attach
to the hard hat with mounting strips or can be used as a
hand held utility flashlight. This allows for quick
installation and removal. They are available in two models:
Rite-Lite I with Zinc battery and Rite-Lite II with Alkaline
battery.
Battery Powered Headlamps
Cyclops® headlamps mount on the hard hat and allow
you to move quickly and efficiently with both hands free.
The front mounted design and sealed battery compartment
eliminates cumbersome external wiring and allows for the
even distribution of weight across the forehead.
UNDERWATER KINETICS
UK 4AA Work Light
This fully
accessorized work light can be mounted on a hard hat or fire
helmet, carried in a belt pouch or used to direct traffic.
FM,CSA and UL or CENELEC ATEX approved.
UK 4AA eLED ZOOM Work Light
The
UK4AA ZOOM eLED work light features a 2-watt white LED with
adjustable beam width and two power setting. Electronic
circuitry provides constant brightness for 80% battery life.
UL CSA approved.
LITLINK™
The LITLINK™ is the first hot stick tool light. By
connecting it in line with any hotstick tool, the LITLINK’s
high intensity LED provides lighting for work in dark or
unlighted areas. Night operations become safer and more
efficient. Fits all major hot sticks and tools with splined
universal slotted connector.
LITFINGER™
The
LITFINGER™ is the first hot stick finger light. It has a
built-in LED light for use in dark or unlighted areas making
it safer and more efficient for night operations. Fits all
major hot sticks with splined universal slotted connector
(patent pending).
Sunlight D8
It is UK's most powerful light to use disposable
alkaline batteries. The high brightness beam, long burn time
and waterproof design make this light a workhorse for rough
conditions. The unique dual lamp system allows for safety
backup and 60 hours total lamp life.
J. L. Matthews Co. offers an extensive
line of products. To see a complete
listing please refer to our
Brand New catalog.
High leverage ratchet mechanism for single-handed cutting of
copper and aluminum cables, leaving no burrs or sharp edges.
Quick release opens blades in every cutting position.
Precision ratcheting mechanism holds cable tight and allows
rapid, straight cuts with minimum effort. Hardened steel
cutting blades for lasting strength and sharpness. Plastic
covered handles with hand guards for comfort and firm grip.
Locking lever keeps handles closed for easy transport, to
fit in toolbox or bag. Cuts copper and aluminum up to 600 MCM.
BugWrench™ Model
BW-251
This
Heavy-Duty Dropped-Forge BugWrench model has a combination
of 9/16" and 3/4" that cannot be found at the local hardware
store. This combination is just right when installing or
performing maintenance on overhead transformers.
In-Line
Crimp Tool
Comfortable
and durable tools for the professional. Contains one
side-cutting pliers, one diagonal-cutting pliers, two
long-nose pliers, one pump pliers, one crimping/cutting
tool, one cable cutter, two Klein-Kurve™ wire
strippers/cutters, one Klein-Kurve utility knife, two
adjustable wrenches, three keystone-tip screwdrivers, three
cabinet-tip screwdrivers, two phillips-tip screwdrivers, one
wire-bending screwdriver, one square-recess tip screwdriver,
one Rapi-Driv® screwdriver, one conduit-fitting & reaming
screwdriver, one 12-piece hex-key set, seven nut drivers,
one awl, one torpedo level, one protective eyewear, one
cable splicer's kit, one canvas zipper bag, one power-return
rule, one 120' Speedway® fish tape, one shoulder strap, one
18" 10-pocket tool bag.
Special
knurled, spring loaded jaws for working with annealed rebar
tie wire. Exclusive handle tempering absorbs the "snap" when
cutting wire. Soft, light-blue handle material on outer
surface for comfort and a firm grip. 2000 Series heavy-duty
cutting knives cut ACSR, screws, nails and most hardened
wire.
