We offer an extensive line of lineman accessories and equipment
from the leading manufacturers. On this page you will see a small
sampling of these products.
Designed with the needs
of utility workers, linemen and arborists in mind, the
Highliner's numerous protective features including leather
side patch, heavy steel shank, steel sideplates and heel
breastplate make it an essential piece of safety equipment
on the job.
Samples of 10" Highliner Style
Samples of 16" Highliner Style
Jobmaster
From ranchers to linemen
to mechanics, and all those in between, if your job has you
on your feet for hours on end, you'll welcome the comfort
and support of our Jobmaster. Our bestselling work boot is
carried in stock, but can also be custom made with your
choice of options and heights.
Samples of 10" Jobmaster Style
WEINBRENNER BOOTS
16" LINEMAN'S BOOT - Composite Safety Toe
Upper: Full Grain Oil-Tanned Leather Construction: Goodyear Storm Welt Outsole: Vibram® Austin Oil Resisting Rubber Mini-Lug Insole: Removable Dual Density Ultimate Shock
Absorption™ Insert Midsole: Rubber Shank: Steel Triple Ladder Shank with Half Slip Wedge
for Better Arch Support Special Features: ASTM F 2413-05 M/I/75/C/75
Composite Safety
Toe Electrical Hazard. Double Leather Pole Guard. ISO
9001 Certified Shoe Company.
Part No.
804-4254
Size: 8.5-12, 13, 14 D, E, EE
10" LINEMAN'S BOOT - Composite Safety Toe
Upper: Full Grain Oil-Tanned Leather Construction: Goodyear Storm Welt Outsole: Vibram® Austin Oil Resisting Rubber Mini-Lug Insole: Removable Dual Density Ultimate Shock
Absorption™ Insert Midsole: Rubber Shank: Steel Triple Ladder Shank with Half Slip Wedge
for Better Arch Support Special Features: ASTM F 2413-05 M/I/75/C/75
Composite Safety
Toe Electrical Hazard. Double Leather Pole Guard. ISO
9001 Certified Shoe Company.
Part No.
804-4453
Size: 8.5-12, 13, 14 D, E
16" LINEMAN'S BOOT - NON Safety Toe
Upper: Full Grain Oil-Tanned Leather Construction: Goodyear Storm Welt Outsole: Vibram® Austin Oil Resisting Rubber Mini-Lug Insole: Removable Dual Density Ultimate Shock
Absorption™ Insert Midsole: Rubber Shank: Steel Triple Ladder Shank with Half Slip Wedge
for Better Arch Support Special Features: Removable Kiltie. Double Leather
Pole Guard. ISO
9001 Certified Shoe Company.
Part No.
814-4254
Size: 8.5-12, 13, 14 D, EE
RADIANS
RAD-INFINITY SAFETY GLASSES
All IN1 models come in Black Frame and Model IN1-10: Clear Lens Model IN1-20: Smoke Lens Model IN1-60: Silver Mirror Lens Model IN1-90: Indoor/Outdoor Lens
Model IN6-GR: Has Silver Frame and Green Mirror Lens.
Shown with Neckcord which comes standard with all of the above models
All hearing protection is tested
according to ANSI S3.19-1974 standards. The lightweight,
eight ounce Economuff model features comfortable ear pads
that ensure all-day wearing without fatigue and the durable
design provides protection in tough, dirty environments. The
Multi-Position muff has all of the features as our Economuff
model, plus it incorporates a support strap used when
wearing the muff behind the head or under the chin. The NRR
is also much higher than the Economuff unit at 24 dB.
Multi-Position Pictured
EXC Muff (NRR - 24dB) EXC Cap Model
(NRR - 25dB)
The ear muff is so comfortable that you always want to
wear it. Unique injection molded inserts provide excellent
attenuation and maximum space for the ears inside the cap.
Headband model offers force adjustment for individual fit.
The helmet-mounted version has a spring design that offers
low pressure tension and a high level of comfort.
XLS Cap Model (NRR - 23dB)
Designed to fit comfortably under safety hardhats and
faceshields, it features easy-to-remove ear cushions for
quick cleaning and replacement. The XLS Muff offers
agressive protection in low-moderate noise environments.
Tri-Seal Reusable Silicone Ear Plugs
All hearing protection is tested according to ANSI
S3.19-1974 standards. Ruggedly designed of soft, comfortable
silicone, these reusable ear plugs are easy to insert in the
ear, economical and offer protection comparable to many MSA
ear muffs. Tri-Seal plugs (NRR - 25) are available in corded
and uncorded versions in dispenser boxes of 100 individually
packaged pairs. Also available in the corded version as one
pair in a plastic case with a chain.
KUNZ
GLOVE
Lineman's Work Gloves
Kunz work gloves have set the standard for durability and
comfort. Three specially tanned heavy weight (4 oz. plus)
grain leathers are used in the manufacture of Kunz work
glove.
For extra comfort, gloves are sewn in the gunn pattern
with strong nylon thread. Reinforced welted thumb seams and
Davey tips on the fingers give extra wear and prevent seams
from ripping in critical locations. A leather welt at the
base of the fingers gives extra protection for a heavy wear
area.
Slip-on style - A durable glove for almost any
application. The 2" split leather safety cuff has a
reinforcing wrist pad and offers limited arm protection.
Gauntlet style - The most popular style for
lineworkers. A reinforced thumb strap makes this design our
most durable. The 4.5" and 6.5" lined split leather cuff
offers different degrees of arm protection (split leather
gloves have fabric cuff). Elastic back adds comfort and
prevents slipping. For extra heavy duty applications, heavy
(5 to 5.5 oz.) buckskin leather is offered.
High-Voltage Leather Protectors
The Kunz Glove Company set a goal to develop a protector
that would increase hand mobility. One that would reduce
hand stress, discomfort and fatigue while maintaining the
required mechanical protection and fit for maximum life and
safety. The result is our "free-thumb" high-performance
protector.
Cowhide Protectors - Our most popular and most
durable. Specially tanned 2.75 oz. to 3.5 oz. weight grain
leather is uniform, soft and pliable. Flexible and
long-wearing qualities make these ideal for heavy wear. Our
bucktan and cream-colored cowhide provide a
traditional-feel, while the buffed-red cowhide is tanned to
be more flexible.
Buckskin Protectors - Made from elk or deerskin,
buckskin is often preferred for its more supple feel and
durability. Better for cold and/or wet weather conditions.
Although lighter in weight, these protectors offer many of
the same qualities which made our Kunz buckskin work gloves
famous.
Goatskin Protectors - Lightweight and flexible,
goatskin offers the best dexterity. This supple, cream or
pearl-colored leather returns to its original texture after
exposure to moisture.
BUCKINGHAM
No. 5231
— Sleeve Bag
NEW
A 30" long sleeve bag that can fit up
to 29" sleeves. Features an added glove bag pocket and a
velcro hanger inside the bag to keep sleeves from falling to
the bottom. Also features a liner/glove dust pouch.
Measures 30" L x 3" W.
No. TB94059A
— Climber Set
Complete titanium pole climber set
includes:
Contoured shank
Offset stirrup
Screw style replaceable gaff
2239 nylon leg straps
21391 nylon foot straps
3122 climber pads
No. T94059A
— Climber Set
Complete titanium pole climber set
includes:
Non contoured shank
Offset stirrup with bevel
Screw style replaceable gaff
2239 nylon leg straps
21391 nylon foot straps
3122 climber pads
No. 3500
Velcro Wrap Pad A velcro pad that features continuous
wrap. Comes without a metal insert and without cinch.
Measures 4" W with 3/4" padding.
No. 3502
Velcro Wrap Pad with Insert An angled style velcro
pad that features a continuous wrap with a metal insert.
Measures 4" width.
BASHLIN INDUSTRIES
Pole Climbers
BD14-1N
comes with bottom straps attached. The BD14 series is aluminum alloy offset climber with
a replaceable, forged steel gaff. This lightweight climber
reduces fatigue and adds climbing comfort. Comparable steel
climbers weigh 30% more. The aluminum alloy construction
sacrifices some wearing qualities.
BD16B-1N
comes with bottom straps attached. The BD16B series rugged, steel alloy adjustable
climber features a replaceable gaff, roomy ankle area, and a
triangular strap ring.
BD16BC-1N
comes with bottom straps attached. The BD16BC series steel climber has a replaceable
gaff and twisted shank. The twisted shank lies flatter on
the leg for more comfort.
Hook-N-Loop Black Leather Climber PadsNEW
Bashlin’s V climber pads eliminate straps and buckles for
easy donning and have a comfortable wrap around padding for
comfort. They fit most standard climbers, and are available
in the standard “T” design (150V) or with a metal insert for
positive climber control. (145V). No. 150V, Hook-N-Loop Climber Pad
No. 145VAC, Hook-N-Loop for Steel Climbers
No. 145VBC, Hook-N-Loop Aluminum Climbers
KLEIN TOOLS
CN1972AR - Pole Climbers with 1-1/2"
Gaffs – Complete Set
8"
x 8" (203 x 203 mm) cushioned, high-grade leather climber
pads for maximum comfort. Neoprene-impregnated nylon climber
straps for long-lasting life. Secure sleeve and leg iron
connection. Two slotted hex-head bolts with lock washers and
barrel-type nuts join the steel sleeve and leg iron
together. Steel split ring secures ankle strap in place and
allows for quick replacement. 4-7/16" (113 mm) wide stirrup
provides greater foot support. Adjustable climber length –
steel sleeve moves in 1/4" (6 mm) increments for the most
comfortable fit. Contoured leg irons help position gaffs
securely and comfortably. Replaceable gaff firmly attaches
to the leg iron with a center pin and two TORX® screws.
C.C.A. pole gaff. Designed to penetrate the hardest
salt-treated poles. To determine size needed, measure from
instep to 1" (25 mm) below knee. Sold in pairs only.
8210 - Climber Pads
for Pole and Tree Climbers
3/4" (19 mm) thick cushioned right and left “L”-shaped
leather pads. Sold in pairs only.
KG-2 - Gaff Sharpening Kit
for Pole and Tree Climbers
Contains the following:
8" fine-tooth file,
3" honing stone,
Klein gaff gauge,
fully-illustrated gaff sharpener instructions,
handy roll-up canvas case with tie
Belts
BUCKINGHAM
No. 2000MBU
— Full Float
Body Belt
This is the finest belt
available and is hand crafted of the highest quality
leather. It features a full float body belt with a 5 1/2"
foam cushioned pad reinforced with rawhide lace. The belt
strap is leather with a nylon center to provide strength and
longer life. The floating dees provide 4" lateral movement
to reduce the wear on the pole strap. Weight 7 lbs.
No. 2012M — Light Weight
Full Float Body Belt A light weight full float body
belt with a 5" Dri-lex lined cushion pad designed to wick
mositure away from the user. Superior comfort is provided by
extra padding in the back support. Features 2 work
positioning dee rings. Weight 6 lbs.
No. 2016M — Light Weight
Full Float Body Belt
NEW A light weight full float body
belt with a 20006 backsaver. Weight 6.5 lbs.
No. 2013M — Light Weight
Full Float Body Belt A light weight full float body
belt with an 8" backsaver to provide support and relieve
lower back strain. Features 2 work positioning dee rings.
Weight 6.2 lbs.
BASHLIN INDUSTRIES
The Maverick
NEW
Finally Bashlin offers
climbing equipment in black leather. It was worth the wait.
Compare Maverick climbing equipment with the others on the
market. This is the finest black tool belt available
No. 88X, Tool Belt (pictured) Sizes from D18 to D28 No. 88BX, Rest A Back
No. 88GX, Hip Grip
The Floridian — No. 88 Superior design and performance make this belt the
industry standard. It combines a padded, contour cushion
section with flares for the shifting "D" rings and a 5-1/2"
back. This belt gives excellent support and climbing
comfort. It is a practical belt with wearable quality which
makes it economical. 6.5 lb.
The Bashlin — No. 60FH
The Bashlin Deluxe is a field-tested, proven design. It
is one of the original semi-floating, shifting "D" belts.
The shifting "D"s reduce chafing and bumps on the hips. The
5" cushion pad is soft and breaks in easily. The harness
leather tool loops, tongue & buckle section are
designed for rugged wear. 6.25 lb.
The Journeyman — No. 160NL
Here is a belt designed with the professional in mind.
The cushion is glove-soft, yet extremely durable. It
features a full shifting "D" saddle and a rolled edge
cushion. This is an ideal belt for the lineman who wants
value. 6.0 lb.
The Nylon Delux — No. 160N
A familiar design in a shifting "D" nylon belt. The
neoprene impregnated nylon back is light, durable and
flexible in extreme temperature ranges. The 5" leather
cushion section is comfortable. The tongue and buckle is 6
ply nylon with leather tool loops. 6.0 lb.
Holsters / Bolt Bags
KLEIN TOOLS
5118PRS - Pliers, Rule and
Screwdriver Holder
Leather construction. 3 pockets for pliers, folding rule
and screwdriver. Riveted to assure long life. Pockets for
7", 8", and 9" side-cutting pliers, most screwdrivers, 6'
folding rules, and open end wrenches from 9/16" to 13/16".
5112 - Pliers Holder,
Closed Bottom
Leather construction. Nose of pliers does not protrude
from closed bottom. Bottom is vented to prevent collection
of dirt or water. Riveted to assure long life. Holds 7", 8",
or 9" side-cutting pliers.
5163 - Lineman's Knife Holder
Leather construction. Designed for Klein skinning knives
Cat. Nos. 1570-3, 1570-3LR and 1560-3. Riveted to assure
long life.
Folding Knife Sheaths
NEW
Made of Cordura® ballistic nylon for exceptional
resistance to abrasions, punctures and tears. Padded for
extra protection and comfort
Features adjustable Velcro® closure and double stitch
protection.
5231 - Fits 3" to 3.5" Folding Knife 5233 - Fits 3.5" to 4" Folding Knife 5235 - Fits 4" to 4.5" Folding Knife
BASHLIN INDUSTRIES
Maverick Black Leather Belt AccessoriesNEW
Holsters and a bug bag made of top quality leather. The
holsters are double backed.
No. 26LX, Bolt-n-Nut Bag
No. 111HL,SX Tool Holster (tools tot included)
No. 111HLDSX, Tool Holster (tools not included)
No. 111HLDSX
No. 111HLSX
Bolt Bags — Variety of fine
leather or canvas Bolt Bags from Bashlin Industries.
25A
25BS
25KLBS
25PLS
25PS
26DRM
26G
Safety Harness / Lanyard
BUCKINGHAM
No. 637G8C700V9
H Style Full Body Harness
A 'H' style full bdy harness
that features a web dorsal loop attachment. A Dri-lex shell
that is designed to wick away moisture and a padded Dri-lex
shoulder and leg pads for added overall comfort. Velcro
chest strap that meets ANSI Z359.1 requirements. Patented
split tongue quick connect buckles with leather chafes on
the leg straps. Spring loaded friction buckles for height
adjustment. Made from Type 13 nylong webbing with silver
upper and black lower sections. Meets applicable ANSI
standards.
No. 483D — Buck Squeeze The BuckSqueeze provides
Wood Pole Fall Protection during ascent and descent and,
with the use of a secondary lanyard like the 4812Y, protects
the user while climbing over obstacles. Designed to grip the
pole if the user starts to fall. For distribution poles up
to a 50" circumference.
No. 483M — Buck Squeeze Rescue Trainer Modified
BuckSqueeze unit for hurt man rescue training. Offers the
ability to train without the expense of destroying a
BuckSqueeze unit. During practice the only part that is cut
is the 12" orange nylon webbing. With replacement of the 12"
strip, the unit can be reused.
No. 7V08A18FGM2SW5
Buck-a-Juster
a.k.a. Rope Lanyard Buck-A-Juster with a
microadjustor gives the user the ability to easily adjust
the length of the lanyard with one hand.
No. 106-50
Buck Self Rescue System Ideal for the one man crew!
Provides the means to safely and easily descend to the
ground in the event of a fall from the bucket or the need to
evacuate an inoperable bucket. This systems combines a
specially designed bag that, when deployed, releases a
ladder [to relieve pressure], an ascender, descender and 50'
of rope. Longer lengths are available upon request.
LEWIS MANUFACTURING
COMPANY
Fall Arrest Harnesses
Lewis Manufacturing Company now offers a full line of
fall arrest harnesses constructed of lighter weight high
visibility yellow nylon webbing improving durability and
safety in the oilfield. The webbing is treated for UV light
resistance. To improve leg strap comfort during long term
use, a “rappelling-style” leg strap has been developed that
keeps legs at proper angles for sustained use.
Type
FAH-3Y: D-Rings at front waist, rear waist and rear
shoulder.
Type FAH-3Y-2: D-Rings at front waist, both sides,
rear shoulder and rear waist level make this a true
five-point harness.
Type FAH-3-2-MB: Removable belly band. D-Rings at
front waist, both sides, rear shoulder and rear waist-level
make this a true five-point harness.
Type FAH-3Y W/T: D-Rings at front waist, rear
shoulder and on rear waist-level 11" tail.
Type HCB FAH-3 W/T: D-Rings at rear shoulder and
on rear waist-level 11" tail. Built-in sling seat with dual
D-Rings up front.
Type FAH-3Y-2 Pictured
Type FAH-3-2-MB
WARNING
It is important that you read and understand
all breaking strength, safety and technical data
relating to all Lewis Manufacturing Company
products before use.
KLEIN TOOLS
KL5295-8L - Positioning Strap
Adjustable straps are 1-3/4" (44 mm) wide. Made of 6-ply
Klein-Kord® for maximum wear and chemical resistance.
Drop-forged, single tongue adjustment buckle has a
corrosion-resistant finish. Two drop-forged steel Klein-Lok®
locking snap-hooks with 11/16" (17 mm) throat opening. Red
wear indicator located in the center. Depending on the
application, choose a positioning strap that allows you to
work at arm's length from the pole or other positioning
anchorage.
BASHLIN INDUSTRIES
HL series Pole Straps
They feature the easy to use HL snap. This snap action is
similar to single locking snaps. All Bashlin Pole Straps
meet or exceed ASTM and OSHA requirements.
50 Series - Nylon Straps
78 Series - Leather / Nylon Straps
J. L. Matthews Co. offers an extensive
line of products. To see a complete
listing please refer to our
Brand New catalog.
Kunz work gloves have set the standard for durability and
comfort. Three specially tanned heavy weight (4 oz. plus)
grain leathers are used in the manufacture of Kunz work
glove.
The Kunz Glove Company set a goal to develop a protector
that would increase hand mobility. One that would reduce
hand stress, discomfort and fatigue while maintaining the
required mechanical protection and fit for maximum life and
safety. The result is our "free-thumb" high-performance
protector.
8"
x 8" (203 x 203 mm) cushioned, high-grade leather climber
pads for maximum comfort. Neoprene-impregnated nylon climber
straps for long-lasting life. Secure sleeve and leg iron
connection. Two slotted hex-head bolts with lock washers and
barrel-type nuts join the steel sleeve and leg iron
together. Steel split ring secures ankle strap in place and
allows for quick replacement. 4-7/16" (113 mm) wide stirrup
provides greater foot support. Adjustable climber length –
steel sleeve moves in 1/4" (6 mm) increments for the most
comfortable fit. Contoured leg irons help position gaffs
securely and comfortably. Replaceable gaff firmly attaches
to the leg iron with a center pin and two TORX® screws.
C.C.A. pole gaff. Designed to penetrate the hardest
salt-treated poles. To determine size needed, measure from
instep to 1" (25 mm) below knee. Sold in pairs only.
